disabling factory alarm mazada 3

Home / the12volt's Install Bay / Car Security and Convenience / disabling factory alarm mazada 3 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wuzzles99

Member - Posts: 1

Joined: April 01, 2005

Posted: April 01, 2005 at 6:49 PM / IP Logged

i have a compustar installed on my mazda 3, which i did my self. But i have 1 problem where the factory alarm goes off when i manual lock my doors with the power lock switch and then unlock it with compustar.

what is my problem? is there a way to diasble the factory alarm?

thanks

franko

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: April 01, 2005 at 10:34 PM / IP Logged

disarm wires will lock and unlock the vehicle.

there's a BLACK/ blue and BLACK/ red wire you need to find in the drivers kick

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

disabling factory alarm mazada 3

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.