the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Removing door sills for routing power cab


Post ReplyPost New Topic
< Prev Topic Next Topic >
TriHonda 
Member - Posts: 8
Member spacespace
Joined: March 06, 2005
Location: United States
Posted: April 01, 2005 at 7:43 PM / IP Logged  

Anyone have instructions or links to instructions for how to remove the passenger side door sills for 4ga power cable routing purposes?  I have a 99 Honda EX Sedan.

I know you guys will come thru for me!  :)

overworked2 
Copper - Posts: 132
Copper spacespace
Joined: March 10, 2005
Location: United States
Posted: April 01, 2005 at 8:11 PM / IP Logged  
Pick the side that has smallest loom running down it and shove it in....it will fit, if not...MAKE IT HAPPEN
Check all advice given with a meter

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, November 30, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer