Door Actuators

Home / the12volt's Install Bay / Car Security and Convenience / Door Actuators (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

djkeebz

Member - Posts: 13

Joined: November 15, 2002

Location: United States

Posted: April 03, 2005 at 7:26 AM / IP Logged

I just got some door actuators for a project but the had no instructions on how to wire them? They are the two wire type and im sure this is easy but I wanted to ask before I mess something up!! If wiring these to respond from a negative output from the alarm, what is the proper way to wire? Do I need to use a relay? I just need it to pull one way to unlock and thats it. Thanks in advance for any help.

Back to Top

djkeebz

Member - Posts: 13

Joined: November 15, 2002

Location: United States

Posted: April 03, 2005 at 11:13 AM / IP Logged

Any one know how these work?

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 03, 2005 at 11:23 AM / IP Logged

You will need two relays ( SPDT 5 pin relays ) and wire it up like this: http://www.velocitymotorsport.com/images/install_notes/104.jpg

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

djkeebz

Member - Posts: 13

Joined: November 15, 2002

Location: United States

Posted: April 03, 2005 at 11:53 AM / IP Logged

Thanks!!

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 03, 2005 at 11:54 AM / IP Logged

No problemo

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

83Rangerman

Member - Posts: 5

Joined: July 18, 2004

Posted: April 03, 2005 at 9:35 PM / IP Logged

How would you wire this up if you were adding to a vehicle with no alarm? I just want power locks controlled from a switch in the vehicle. Do you need one or two relays?

Can anyone help?

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 03, 2005 at 11:39 PM / IP Logged

You will still need two relays. Instead of the (-) inputs from the alarm, wire a 3 pin switch and have it rest a nothing and trigger by grounding the middle pin to ground.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Door Actuators

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.