Viper 791XV satellite relay?

youll need that 7-pin harness for that goes to the satellite relay. the yellow wire will need to be hook up to the ignition for programing and some other functions to work. instead of usign that 7pin harness, modify the 4pin harness thats at the satellite and plug it up to the 7pin connector. and mark the ignition input (yellow wire) accordingly.Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

profuse007 wrote: youll need that 7-pin harness for that goes to the satellite relay. the yellow wire will need to be hook up to the ignition for programing and some other functions to work. instead of usign that 7pin harness, modify the 4pin harness thats at the satellite and plug it up to the 7pin connector. and mark the ignition input (yellow wire) accordingly.

Could you draw a simple sketch?

You might as well hook it up. You do not need to hook up the two red wires. If you are doing an alarm it has built in starter kill. green goes to key side and purple to starter side.shocker

you can hook up everything and just don't ground the (18ga) BLACK/ white 5 pin plug that way the remote start don't work at allhow own your mind, control your life.

MECP certified. always use a DMM

YOU ONLY NEED INSTALL THE PINK WIRE FOR ING  THAT ALL YOU NEED TO DO