Giordon T686 2-way alarm

Home / the12volt's Install Bay / Car Security and Convenience / Giordon T686 2-way alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nyll

Member - Posts: 1

Joined: April 04, 2005

Location: Russian Federation

Posted: April 04, 2005 at 7:25 PM / IP Logged

Plz, Annybody nows how to disable the "warning for roadside stop"(light flashes when open door),and enter to the programming mode?

Back to Top

ywdb

Member - Posts: 42

Joined: September 04, 2002

Location: Japan

Posted: May 11, 2005 at 6:46 PM / IP Logged

Hi nyll;

The first, you need open main system case, and access PCB board.

Next, may be you can see jump switch on PCB.(CN1 and CN2)

CN2 jump switch is programming for "warning for roadside stop".

Good luck!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Giordon T686 2-way alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.