2001 Suburban Alarm/remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2001 Suburban Alarm/remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

actionjackson

Copper - Posts: 59

Joined: December 20, 2003

Location: United States

Posted: April 14, 2005 at 9:24 PM / IP Logged

is it the new body style or old

Jamie Jackson

*CRIMPING AINT EASY*

Back to Top

ccroadshop99031

Copper - Posts: 102

Joined: January 26, 2004

Location: United States

Posted: April 14, 2005 at 9:40 PM / IP Logged

it shouldnt be a 5 wire it should be a negiive pule on a white wire and a light blue wire

Back to Top

Search for other posts by ccroadshop99031

Rhino0911

Member - Posts: 10

Joined: March 30, 2005

Location: United States

Posted: April 15, 2005 at 9:51 AM / IP Logged

It is the new body style. I have located the white (unlock wire) and light blue (lock wire). The white wire gets 12V when I hit the unlock swich in driver door when testing with DMM and the light blue gets 12V when hitting lock.

Ryno

Back to Top

Joe Neal

Copper - Posts: 113

Joined: October 15, 2004

Location: United States

Posted: April 15, 2005 at 10:13 AM / IP Logged

Power Lock	L BLUE	HIGH IN DRIVERS
Power Unlock	WHITE	KICK PANEL

Positive Pulse Door Locks

Back to Top

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: April 15, 2005 at 10:50 AM / IP Logged

If you get 12 volts when you use the switch it is positive trigger. You will need to convert the negitive signal from your remote to positive. It is easy to use relays or door lock polarity inverter.. The relay diagrams are right on this site for polarity changing..Hope that helps

Back to Top

Rhino0911

Member - Posts: 10

Joined: March 30, 2005

Location: United States

Posted: April 15, 2005 at 11:46 AM / IP Logged

I have connected factory disarm output to factory disarm wire. However, don't know what to do with factory rearm output from alarm. All wiring diagrams I've seen for my vehicle do not indicate there is a factory rearm wire. Does anyone know if there is such a wire or do I just not connect the factory rearm output?

Ryno

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: April 15, 2005 at 12:55 PM / IP Logged

Double Security??

I thought the Factory Alarm only ARMS with inside Door Switch & Factory Transmitter.................................."Ouch" my Brain hurts....

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 Suburban Alarm/remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.