the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Noise from compressor


Post ReplyPost New Topic
< Prev Topic Next Topic >
Znergy 
Member - Posts: 11
Member spacespace
Joined: April 21, 2005
Posted: April 21, 2005 at 2:11 PM / IP Logged  
Fist off I want to say this is a great site. I'm a newb here but not to the car audio world, even though I will learn much here. I have a air suspension and it seems when I turn the compressor on or adjust the valves the speakers pop(atleast the front components anyway). I assume this is from a bad ground. I have moved the ground and no luck. I was just wondering if you'll have any suggesions. Thanks for all your input and this site will help me out so much. I appoligize if this has been gone over. Every time I hit the search button there is an error.
FinalFrontier 
Member - Posts: 12
Member spacespace
Joined: February 26, 2005
Location: United States
Posted: April 22, 2005 at 8:40 AM / IP Logged  
where are you geting power from?And is your components on an amp?
Znergy 
Member - Posts: 11
Member spacespace
Joined: April 21, 2005
Posted: April 22, 2005 at 1:37 PM / IP Logged  
my components are ofcourse being ran by a seperate four ch amp. I'm getting power to the compressor from the battery. The same battery that the system is running off of. It has different power wires and ground wires, so I really don't know what It could be.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer