the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

91 toyota mr2 turbo wiring diagram

Home / the12volt's Install Bay / Car Security and Convenience / 91 toyota mr2 turbo wiring diagram (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
mr2_503 
Member - Posts: 4
Member spacespace
Joined: November 07, 2002
Location: United States
Posted: November 15, 2002 at 2:58 PM / IP Logged  
Could any body give me the diagram for a 91 toyota mr2 turbo wiring diagram Please
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 15, 2002 at 4:08 PM / IP Logged  

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|BLACK/ red - white   |+  |ignition harness            |
|          STARTER|red                 |+  |ignition harness            |
|         IGNITION|BLACK / YELLOW        |+  |ignition harness            |
|  SECOND IGNITION|BLACK/ orange        |+  |ignition harness            |
|        ACCESSORY|blue/red            |+  |ignition harness            |
|       POWER LOCK|black               |-  |passenger kick panel        |
|     POWER UNLOCK|BLACK / YELLOW        |-  |passenger kick panel        |
| PARKING LIGHTS +|green               |   |drivers kick                |
| PARKING LIGHTS -|lt.GREEN/ red        |   |steering column             |
|       HEADLIGHTS|red                 |-  |steering column             |
|     DOOR TRIGGER|RED / white           |-  |either kick *2              |
|  TRUNK/HATCH PIN|RED / green           |-  |theft ECU                   |
|         HOOD PIN|tied with trunk pin |   |                            |
|  FCTRY ALARM ARM|arms with lock      |   |                            |
|FCTRY ALRM DISARM|disarms with unlock |   |                            |
|       TACHOMETER|BLACK/ white         |   |check connector *1          |
|       BRAKE WIRE|GREEN / WHITE         |+  |brake switch                |
|     HORN TRIGGER|GREEN/ black         |-  |steering column             |
|           WIPERS|blue/black          |+  |wiper switch or column      |
|  LF WINDOW UP/DN|green - red         |A  |in drivers door             |
|  RF WINDOW UP/DN|RED / blue - green    |A  |in drivers door or dkp      |

Notes:

*1 The check connector is on the right rear of the engine compartment.  *2 This wire can also be found at the theft ECU, which is located on the passenger side behind the "B" pillar trim.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
mr2_503 
Member - Posts: 4
Member spacespace
Joined: November 07, 2002
Location: United States
Posted: November 15, 2002 at 5:02 PM / IP Logged  

Jeff,

Thanks for the quick reply.  I do have a quick question for you, for the wire location, when you say ignition harness, do I spliced the female or male adapter, same for steering column and theft ecu.

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 15, 2002 at 11:16 PM / IP Logged  
The locations are the wires that you have to tap into the insulation . You want to peel back the insulation on the target wires and wrap the wires that you have on the alarm or remote starter unit and solder the connection .
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer