wiring led's into alarm

Home / the12volt's Install Bay / Car Security and Convenience / wiring led's into alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

93gt--z

Member - Posts: 14

Joined: February 28, 2005

Location: Canada

Posted: April 29, 2005 at 2:28 PM / IP Logged

Hey all, I have a simple question...I'm trying to wiring in a thing I made(just 3 led's wired in series) to my alarm. I want them to come on when the alarm is armed, but I'm having proiblems finding the "(-) when armed" output...So far I have the led's wired to a 12+ constant, but the other wire I don't have hooked to anything...

I tried a yellow wire on my alarm that is supposed to be negative when armed for the starter kill(which isn't hooked up currently), but I can't seem to get a ground from it...I also found another wire that said it was the same thing, that could be used for a window roll up mechanism. This wire made the led's turn on when armed, but then they go out after about 10 soconds...

What am I doing wrong?And what wire should it be?

Any help is defintley appreciated...

93gt--z

Member - Posts: 14

Joined: February 28, 2005

Location: Canada

Posted: April 29, 2005 at 2:30 PM / IP Logged

heres a diagram of my alarm...

wiring led's into alarm - Last Post -- posted image.

93gt--z

Member - Posts: 14

Joined: February 28, 2005

Location: Canada

Posted: April 29, 2005 at 4:24 PM / IP Logged

so your saying hook it to the red wire? won't that cause the led to always be on, unless the engine is running? I only want it to be on if the alarm is armed...

93gt--z

Member - Posts: 14

Joined: February 28, 2005

Location: Canada

Posted: April 29, 2005 at 5:01 PM / IP Logged

I know they won't flash....that isn't a problem...I do arm it 99 percent of the time, but I still want it to be hooked to my alarm. I think it's pointless for it to be on when it's not armed....if that was the case I would just hook it to my car, and not even have an alarm. No trying to be a jerk or anything, I'd just like it to be on only when my car is armed...

93gt--z

Member - Posts: 14

Joined: February 28, 2005

Location: Canada

Posted: May 03, 2005 at 10:32 PM / IP Logged

does anyone know right off what wire by the ignition wires it would be to hook the led's up to be on always except when the engine was running?it's in a 93 beretta if it matters

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring led's into alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.