clifford sense and tell diagram

Home / the12volt's Install Bay / Car Security and Convenience / clifford sense and tell diagram (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: May 05, 2005 at 8:35 AM / IP Logged

hi i have this unit but no diagram to connect it up so if anyone can help me i would be more than greatfull thanks in advance.

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: May 07, 2005 at 4:19 AM / IP Logged

hi i put a post up about this the other day but got no response i was asking for a diagram for this unit but if it is not possible for a full diagram can anyone who knows some of the wires on this please help me thanks in advance.

bretbowman

Copper - Posts: 156

Joined: February 17, 2005

Location: United States

Posted: May 07, 2005 at 10:53 PM / IP Logged

Is "sense and tell" the model of the alarm?

If so, this maybe why you get no response. Don't think I have ever heard of it before.

2002 Toyota Sequoia Limited 2WD (Clifford G5 Avantguard 5 w/ 2 SmartWindows modules) - IT Engineer - NRA Life Member - LDS Return Missionary - Married for time AND ETERNITY - Eternally sealed family

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: May 08, 2005 at 7:28 AM / IP Logged

no it is an add on for an alarm system clifford made this unit a few years ago it is a moduel that senses anyone near the car and tells them to back away and it says system armed disarmed when the alarm is activated etc

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: May 08, 2005 at 9:29 AM / IP Logged

A proximity Sensor!!!!

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: May 08, 2005 at 4:09 PM / IP Logged

it uses a sensor like a proximity or microwave to sense and supply a ground to the sense and tell unit to activate the speaking

autosound

Copper - Posts: 57

Joined: November 26, 2002

Location: United Kingdom

Posted: May 09, 2005 at 2:20 PM / IP Logged

send me a personal mail with your fax number and i will send it over

autosound

Copper - Posts: 57

Joined: November 26, 2002

Location: United Kingdom

Posted: May 09, 2005 at 2:21 PM / IP Logged

what wiring colours do you have

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: May 09, 2005 at 2:33 PM / IP Logged

the wires are

orange, purple, green, blue, GREEN/ black, yellow, BLACK/ red, 2 spaces empty, red, 2 black wires sealed together i think these are the speaker ones.

the two pins missing i hope u can help me out with

my email is joeman_857@hotmail.com it would be great if you could help me out with this thanks for your help.

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: May 09, 2005 at 2:35 PM / IP Logged

also there are tiny switches on this 1------8 how do you set these up

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.