accord and hitech ht455

Home / the12volt's Install Bay / Car Security and Convenience / accord and hitech ht455 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nguyenphananh

Member - Posts: 19

Joined: May 04, 2005

Posted: May 06, 2005 at 3:08 AM / IP Logged

Hi, I desperately need help. Just hooked up a Hitech ht455 to the 2000 honda accord LX yesterday. The main purpose is for keyless entry, so I didnt hook up all the wire. These are the wires that I connected: chassic ground, constant 12v, hazard llights, unlock, lock (doors), siren, positive door switch and over ride switch, LED. I skipped all the rest of the wire, as well as the shock sensor. The keyless entry and flashing lights works fine. These are my 3 problems:

1. I tried to change the default setting (door open warning..etc) by pressing the override switch (according to the cheap manual), but nothing happened. No matter what I pressed, nothing happened and I couldnt change the setting. What have I done wrong?

2. My connection was minimum, and I tried not to disturb any wires...Now, the SRS light was turn on all the time and would not turn off, even when I disconnect the alarm, the light still on. My friend has a hand held computer hooked up to the car and it said: srs wire was short on driver side. But the inspection didnt show anything interfere with the srs wire....how can I turn this off, of reset this...thank a bunch for this major problem...

3. lastly, the remote has 4 buttons: open\close, trunk open, option1, option2...but the instruction for programming keep mention "press #1, #2"...so which button should I press? the manual was so bad, I can barely understand...anywhere I can download a more complete manual. Thank you

nguyenphananh

Member - Posts: 19

Joined: May 04, 2005

Posted: May 06, 2005 at 3:58 PM / IP Logged

I did use the negative door switch(BLACK/ white). and also used the park light (hazard is the term used by installation manual). I got my info and diagram from this forum :) . thank for the info anyway...:)

nguyenphananh

Member - Posts: 19

Joined: May 04, 2005

Posted: May 06, 2005 at 4:39 PM / IP Logged

since I didnt connect the other ignition wires (for starter, killer), would it be the cause for not being able to do the programming (programming has something to do with turn on/off ignition key)??! please any idea? anybody?

nguyenphananh

Member - Posts: 19

Joined: May 04, 2005

Posted: May 06, 2005 at 11:39 PM / IP Logged

sorry, Im not the profession here, first time ever install an alarm..trial and error, do and learn at the same time. I saw what you meant...my bad :). It was a NEGATIVE door switch (BLACK/ white on car, green on alarm), and the parking brake (RED / black on car, white on alarm(call hazard according to manual)....still not be able to reprograme the alarm. To clarify, I only installed the siren, LED, and over ride switch in order to reprograme (as requires?), other wise, I only need the keyless entry :)

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: May 07, 2005 at 12:10 AM / IP Logged

Try this link http://www.home.earthlink.net/~lam.tran/id19.html, good information on your vehicle.

fallenimmortal

Member - Posts: 1

Joined: May 11, 2005

Location: United States

Posted: May 15, 2005 at 12:37 PM / IP Logged

Okay, I know this topic is old, and you might have found it already, but for any others that might want this info on this alarm system, to program, you put it in Valet mode, like instructions, and then turn off the key and push the override button 4 times. Then push the Arm/Disarm button and the Option 2 button together, this puts it into program mode. Then from there, Button 1 becomes the trunk button, and button 2 is the option 1 button.

I found this out by playing with it a lil. Hopefully it will help somebody in the future

Search for other posts by fallenimmortal

nguyenphananh

Member - Posts: 19

Joined: May 04, 2005

Posted: May 16, 2005 at 3:37 AM / IP Logged

THAT IT!! I can confirm that the instruction from Fallenimomortal works!!

You are truly our hero :). I've been searching all over the net, and this forum as well, frantically emailed almost all the members in this message,and the tech as well...for the instruction. And if you look around, quite a fews people with this alarm have this problem. I even drove for more than an hour, trying to contact the people who solved me this alarm...and they just as clueless as me, nothing would work. And at 1:30am, after reading your instruction, I tried that on my car...and miraculously, it just worked perfect :). Without your invention, Im not sure how we would figure this out, cuz the stupid manual has a totally different instruction ?!

Thank again....

nguyenphananh

Member - Posts: 19

Joined: May 04, 2005

Posted: May 16, 2005 at 3:37 AM / IP Logged

THAT IT!! I can confirm that the instruction from Fallenimomortal works!!

Thank again....

nguyenphananh

Member - Posts: 19

Joined: May 04, 2005

Posted: May 16, 2005 at 3:37 AM / IP Logged

THAT IT!! I can confirm that the instruction from Fallenimomortal works!!

Thank again....

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

accord and hitech ht455

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.