Wiring 2 sets of lights on one switch

I have recently added 2 sets of fog lights to my jeep. One set is a 37watt pair the other is a 55watt. Both have their own relay, but I would like to use one switch. I have tapped into the 86 connector on the switch to allow both relays to turn on with one flick of the switch. can anyone tell me if this is correct? I reason I ask is because I have blown 2 fuses on the 55watt pair (15amp and 30amp). the fuse blown is the one from the battery to the relay for the lights. none of them run off of the highbeams or daytime lights. These are all independent from the in-house lights.

link: http://www.4x4wire.com/tech/electrical/zj_lighting/ This is what i am trying to do, but without the AUTO part on the switch.

This is EXACTLY what i am doing.