Valet 561t Remote Starter Wiring

Home / the12volt's Install Bay / Car Security and Convenience / Valet 561t Remote Starter Wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

noctumluvr

Member - Posts: 1

Joined: May 25, 2005

Location: United States

Posted: May 26, 2005 at 12:27 AM / IP Logged

I am installing this brand for the first time and some of the wiring I can't figure out.

There is a harness labled 4-pin satellite harness with the following lables.

Blue = status output

Orange = accessory trigger

Purple = starter trigger

Pink = ignition trigger

This can be seen on the directed web site.

Anyway, there is no mention of these wires in the installation manual and I don't understand what they are for. Thsi is not my first remote start install but this is the first DEI system. I have all the wiring diagrams for my car and the starter.

Thanks for the assistance.

Tom Darling

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 26, 2005 at 12:34 AM / IP Logged

BLUE wire is for devices that require a (-) trigger only during remote start sequence such as bypass modules, OEM alarm disarms, etc. The other wires are (-) trigger wires for the respective 2nd ACC , IGN or STARTER if required in the installation. This is to drive a relay.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: May 26, 2005 at 10:21 AM / IP Logged

in most cases you'll never use this harness ( i have over 100 in a shop box here)... you can use the blue/white 2nd status wire that is in the same harness as the brake/ tach/ hood pin.....and since it comes with selectable 2nd Ign/2nd Acc already... it's very rare you ever need to power extra relays

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Valet 561t Remote Starter Wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.