seal air?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / seal air? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lilbenny

Copper - Posts: 116

Joined: April 01, 2005

Posted: May 27, 2005 at 5:58 AM / IP Logged

after done fiberglassing and resining the holes, whats the best thing to use to seal the FG to make sure its airtight? i had a hole and i used body filler.. idk if thats good or not... help?

Back to Top

branvw

Copper - Posts: 90

Joined: November 25, 2004

Location: Canada

Posted: May 27, 2005 at 9:06 AM / IP Logged

I would use a little body fill and mix it with resin, then when you have a thick paint add mekp,,,,,, paint it on the inside of the box and it will turn very hard and fill any holes you have and make it air tight,

Back to Top

oonikfraleyoo

Gold - Posts: 1,069

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2005

Location: United States

Posted: May 27, 2005 at 9:13 AM / IP Logged

To be honest, if you did it right, there should be no question as to whether or not it is airtight.

Nik

Jeeputer Progress

[|||||||||||-] 90%

Check it out.

Back to Top

lilbenny

Copper - Posts: 116

Joined: April 01, 2005

Posted: May 28, 2005 at 10:07 AM / IP Logged

what about hot glue and melting it along the sideS?

Back to Top

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: May 28, 2005 at 12:08 PM / IP Logged

Fiberglass is airtight.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

seal air?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.