mazda 6

Home / the12volt's Install Bay / Car Security and Convenience / mazda 6 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

IIrjII

Copper - Posts: 103

Joined: October 12, 2003

Posted: May 27, 2005 at 7:37 PM / IP Logged

I am installin an alarm in a mazda 6. The lock/unlock wire requires a resistor and a relay. How do I wire the relay? Also, will the factory arm/disarm wire relay be wired the same way the lock/unlock relay be wired? Thanks

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: May 27, 2005 at 10:32 PM / IP Logged

Lock is negative trigger thru a 1.4K ohm resistor. Unlock is a straight negative trigger. MUST use relays.

85-unlock

86-12volt constant fused

30-ground

87-through a 1.4K for lock

unlock may not need relay.

use keysense to disarm w/o unlocking. as far as what wire form ur unit to use, you need to specify what unit you have. next time, state ur make/yr/model and unit make/model for faster response.

Keysense WHITE/ blue + ignition harness

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mazda 6

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.