Ai606 in Pug 306

Home / the12volt's Install Bay / Car Security and Convenience / Ai606 in Pug 306 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Riviera2k

Member - Posts: 4

Joined: May 28, 2005

Location: United Kingdom

Posted: May 28, 2005 at 1:23 PM / IP Logged

Ive installed a Ai606 in my 2000 Pug, i havenet fit the immobilisers yet though as i have a good one already on there.

But when i lock the car it beeps 3 time which indicates something in the manual it says Doors (-) what does this mean i increased the pulse to 4secs so that the car locked the deadlocks.

Also the car doors do not lock when the ignition is started does anyone have any ideas, and i cant press the button on the fob to lock the doors either, but the doors lock when i arm with the fob.

Really confused would be greatful for any help.

Thanks

Ian

Riviera2k

Member - Posts: 4

Joined: May 28, 2005

Location: United Kingdom

Posted: June 03, 2005 at 6:38 AM / IP Logged

AnY iDeAs PlEaSe

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 03, 2005 at 7:33 AM / IP Logged

are the alarm outputs negative. did you test the lock and unlick wires to make sure thew where negative switches

Riviera2k

Member - Posts: 4

Joined: May 28, 2005

Location: United Kingdom

Posted: June 03, 2005 at 7:52 AM / IP Logged

Yeah i tested the doors, they lock and unlock correctly when i use the alarm remote, it alarms and sounds when tested.

This is why im confused.

nam-eci

Member - Posts: 25

Joined: April 06, 2005

Location: United Kingdom

Posted: June 03, 2005 at 8:16 AM / IP Logged

Bonnet Pin? !

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 03, 2005 at 8:39 AM / IP Logged

yes ckeck your triggers

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: June 03, 2005 at 10:29 AM / IP Logged

i have fitted two of these alarms havent had any problems like that check all trigger inputs and wire the immob wires the correct way, also you might have to program the ignition locking but it should be on default settings.

Riviera2k

Member - Posts: 4

Joined: May 28, 2005

Location: United Kingdom

Posted: June 06, 2005 at 8:45 AM / IP Logged

I have checked the bonnet switch, and door switchs they all work fine, some one has told me i could be down to the int light delay causing it not to arm correctly.

Also i havent wired up my immboliser circuits yet, so they shouldnt make any difference.

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: June 06, 2005 at 12:43 PM / IP Logged

i will go through the wiring diagram and check it out see if there is any thing that could have been missed out

Evolution-UK

Copper - Posts: 192

Joined: June 19, 2005

Location: United Kingdom

Posted: June 19, 2005 at 2:21 PM / IP Logged

3 chirps means that the door trigger is still active on arming. this is usually caused by an interior light delay. software switch 3-6 should be changed to take this into account.

Some cars wont allow the locks to be activated when the ignition is active. This can sometimes be overcome by rewiring the locking system in the drivers door but generally it is easier just to write the feature off.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ai606 in Pug 306

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.