Black Widow BW10000 door unlock issue

Test the orange wire (make sure it's getting 12V) and the white wire (should pulse 12V while unlocking). Are there any fuses on these wires? If so, check them. Try putting 12V and ground both ways across the actuator wires and make sure they actually lock and unlock the doors correctly... A coil on the relay could possibly be bad, but it's about 1000:1 against. Much more likely that you have a bad connection somewhere... Me

Should check connections again & be sure U R getting Reversal Ground on both PIN 30s...........Also be sure the Negative Trigger is not reversed on 87a & 86MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.