Lincoln Navigator remote Start?

Hi everybody!!!

Has someone have been install an Alarm with remote start on this car?well I tried to do it but the car start and dies after that.

I change from the alarm menu some features to make it work but It didn't work, does someone know what happen?

(I used a 555u bypass with a new coded key)  

That's a good question!!!

I don't know if I did it,I think I put the new key inside of the transpoder and that's it.Maybe that could be the problem.

OK, heres what you do.  Put the new key in the module.   Turn key # 1 on, wait until security light goes off, turn key #2 on, wait until security light goes off, then start with remote start.  The new key should now be programmed and the truck should start.

To check everything is ok with the remote start before you do this, but one of the original keys in the bypass module and try to start it. Once you have everything working ok, then do as I said above.