Mitsubishi Legnum 1997

Home / the12volt's Install Bay / Car Security and Convenience / Mitsubishi Legnum 1997 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

ktmb

Member - Posts: 5

Joined: June 08, 2005

Location: New Zealand

Posted: June 09, 2005 at 5:08 PM / IP Logged

Morning!

Spent all last night trying to fit the dam alarm. The relay clicks, but doesn't unlock the doors because there are separate wires for central locking and central locking door motor (of course...these things are never meant to be easy).

So....after taking the whole front dash off the car (nearly)...the alarm is in!

Also...trying to find a place in the fire wall to put the siren wires through to the fusebox to connect to the alarm circuit...well..that was fun too.

But the wiring guide was pretty helpful...did have a couple of different colours for door locks etc., but most of it was bang on. Thanks heaps...I now have an alarm.

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 10, 2005 at 5:26 AM / IP Logged

Good For you man.

may it work well an protect your car for years to come

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Mitsubishi Legnum 1997

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.