the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Wire a Relay to Pop 03 Camry Trunk?


Post ReplyPost New Topic
< Prev Topic Next Topic >
shebal 
Member - Posts: 17
Member spacespace
Joined: January 25, 2003
Location: United States
Posted: June 11, 2005 at 11:08 PM / IP Logged  
Wanted to wire up a relay with a Viper 130XV Remote Start to pop the trunk on a 2003 Toyota Camry.
Here's what I tried:
On the relay: 30 - WHITE/ blue trunk wire (driver kick)
              85 - RED / white wire (viper brain)
              86 - constant 12v (+)
              87 - ground (-)
Didn't seem to pop the trunk. Any input?
Thanks guys.
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: June 11, 2005 at 11:33 PM / IP Logged  
You are holding the button down for 3-5 seconds right?
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Scuba_04 
Member - Posts: 19
Member spacespace
Joined: June 12, 2005
Location: United States
Posted: June 12, 2005 at 1:07 AM / IP Logged  
I agree with (auex) look in your manual see if you have to hold the button.
Steve
Music Mart
Installer
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: June 12, 2005 at 11:23 AM / IP Logged  

Find the key detector wire for the trunk as well, its directly under the trunk wire...(wich is rev polarity)

wire your relay as followscut  the trunk pop wire Lt.blue/white the dash side of the wire goes to pin 87a, the trunk side to 30. 12 volts fused 10 amps to 87 and 86. your neg. trigger to 85. From the trigger wire BEFORE the relay jump that over to the key detecter wire (neg trig) with a diode in line. cathode end (the line) towards your unit. The key detector wire is lt. GREEN / WHITE. This will trick the factory security into thinking the key is being used, no need to disarm before popping the trunk!

If you dont have factory security disreguard the key detect stuff, and wire up the relay the same way as above!!


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer