Multiple Lights To Sound Controller

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Multiple Lights To Sound Controller (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

Mikerosoft

Member - Posts: 6

Joined: June 15, 2005

Location: Canada

Posted: June 17, 2005 at 5:44 PM / IP Logged

Theshadow27 wrote:

the point of a flashing LED is that... well.. it flashes! there is a built in flasher that turns it on and off. it also acts like a voltage switch, when the LED is on there is + voltage across it, and when it is off there is an open circut. normal LEDs just light up constantly when you aply power.

the POT varies the voltage that the flashing led flashes at, which changes its rate of flash. here is one:

http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F011%5F002%5F011%5F000&product%5fid=271%2D342

Haha! Alright. Thats what I was thinking, but I didn't want to assume. Thank you very much for all of your help. One last question I had though... am I going to have to use any resistors in here? and what kind do I need? Or would I be able to ask the guys at radioshack?

-Mike

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Multiple Lights To Sound Controller

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.