spacer spacer spacer spacer

How To Make Circular Rings

Post ReplyPost New Topic
< Prev Topic Next Topic >
Copper - Posts: 46
Copper spacespace
Joined: November 06, 2004
Location: Canada
Posted: July 17, 2005 at 7:07 PM / IP Logged  

Here's a link for the circle cutting jig

for any of you that may want to build one for yourself How To Make Circular Rings - Page 2 - Last Post -- posted image.

In a world full of copycats, it's great to be an original!
Member - Posts: 1
Member spacespace
Joined: July 18, 2005
Location: Canada
Posted: July 18, 2005 at 9:02 AM / IP Logged  

How To Make Circular Rings - Page 2 - Last Post -- posted image.

Heres one I made awhile ago. I just welded a bolt to the fence that came with the router. Works great and its easy to adjust.

Copper - Posts: 57
Copper spaceThis member has made a donation to Click here for more info.spacespace
Joined: May 24, 2005
Location: United States
Posted: July 18, 2005 at 2:28 PM / IP Logged  
why do you use the spacer rings?
Member - Posts: 20
Member spacespace
Joined: July 27, 2005
Location: United States
Posted: July 27, 2005 at 9:20 AM / IP Logged  
How To Make Circular Rings - Page 2 - Last Post -- posted image.the Jasper circle jig is still the best for exact measurements.
Member - Posts: 26
Member spacespace
Joined: June 22, 2005
Location: United States
Posted: August 17, 2005 at 1:15 AM / IP Logged  
i cut a triangel out of lexan, drilled holes to match the router screws on the bottom of the router, then measured out from there, every half inch from the router blade is 1" and drilled holes every half inch. then measured in a different direction and drilled holes every 1/2" starting on a 1/4" offset from the other holes. so i had 1/2" incriments.
then just screwed a screw into the hole that i wanted and spin the router away. it was beautiful and cost 7 bux for the plexi/lexan at home depot.
nothing amazing yet, but its coming
Copper - Posts: 50
Copper spacespace
Joined: August 14, 2005
Location: United States
Posted: August 21, 2005 at 1:08 PM / IP Logged  
Is there an easy way to make rings with using only a Dremel?
Member - Posts: 26
Member spacespace
Joined: September 19, 2004
Location: Nebraska, United States
Posted: August 24, 2005 at 3:37 PM / IP Logged  

This is my setup

How To Make Circular Rings - Page 2 - Last Post -- posted image.

Copper - Posts: 102
Copper spacespace
Joined: February 09, 2005
Location: United States
Posted: September 07, 2005 at 8:16 AM / IP Logged  

what do you guys think is the best router for the money. i'm gonna invest in one and don't wanna get shafted in doing so.

Member - Posts: 6
Member spacespace
Joined: August 16, 2005
Location: United States
Posted: September 24, 2005 at 11:47 PM / IP Logged  
There are a few routers that will hold up and last. DeWalt, Porter Cable are a couple. Awesome brands that will hold up forever. But if you guy's dont want to invest the money $3-400 in jigs and routers, you can always purchase them premade -
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Saturday, April 20, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer