Autopage rf-520lcd install manual.

you can only get the install manual from www.autopageusa.com and you have to log into it with a dealer log in.

The consumer is not supposed to have access to the install manuals.

I would suggest going back to your shop to get it.

I used to own my own shop and have 5+ years of alarm installation experience,   so mabey you could log on and get the manual and e-mail it to me.   I would appreciate it thanx. 

jaredsimpson@charter.net 

maybe you can help me on this.

after doing a quick search, I found that it is the lt GREEN/ red and brown red wires that need to be hooked to the alarm.  My unit has 6 pins:

white - unlock NC                                                                             

brown - unlock COM

Yellow - unlock NO

blue - lock NC

Orange - lock COM

Purple - lock NO

Diagram says to use brown and purple. Cut white and blue and ground yellow and purple.  I tried it and it doesn't work.  Diagram 2 says to hook yellow and purple to 12V.  Didn't work.  I don't want to think that my alarm is defective after installing it.  HEEEEELLLLPPPPP.