Viper 791XV relay connection

Home / the12volt's Install Bay / Car Security and Convenience / Viper 791XV relay connection (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dlp4

Member - Posts: 6

Joined: June 26, 2005

Location: United States

Posted: June 26, 2005 at 2:02 PM / IP Logged

I'm looking at the heavy gauge orange wire that exits the Relay Key Switch Interface on a Viper 791XV and the manual says to "connect this wire to the accessory wire in the vehicle which powers the climate control system".

Do they want this connected to the fused side of the switch so that it sees 12 volts from the accessory circuit? Or do they want it connected to climate control side of the switch so that it turns on the climate control? I'm guessing the later but I want to make sure.

Thanks!

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: June 26, 2005 at 2:33 PM / IP Logged

ORANGE goes to ACCESSORY Wire at Ignition Switch that powers the A/C.

Not knowing WHAT vehicle U R installing into.................

Some vehicles have a seperate A/C-Heater Power wire and a BLOWER/Fan Power wire.

Don't Learn from Others Mistakes

You Might Be the One That Knows.

dlp4

Member - Posts: 6

Joined: June 26, 2005

Location: United States

Posted: June 26, 2005 at 3:21 PM / IP Logged

It's a 1967 Plymouth Barracuda. If I connect the orange wire at the accessory pin of the ignition switch, it will always "see" 12 volts when the key is on. Is that what I want? This accessory pin feeds power to all of the accessories.

There is one power wire to the climate control panel that switches the A/C, heater and blower on/off.

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: June 26, 2005 at 3:58 PM / IP Logged

The Remote Start Relays are only activated by the 791XV and the wires you hook up for the Remote Start will not have any function until the 791XV is activated....

The function of the ORANGE wire is to duplicate what your Ignition Switch would do with the Key ON.....Turn on the ACCESSORIES

Don't Learn from Others Mistakes

You Might Be the One That Knows.

dlp4

Member - Posts: 6

Joined: June 26, 2005

Location: United States

Posted: June 26, 2005 at 5:18 PM / IP Logged

Oh, I see. I didn't realize that was part of the remote start circuit. That explains the ignition 1 and ignition 2 relays. Thanks a lot, really appreciate your help.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 791XV relay connection

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.