priming and painting

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / priming and painting (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

phatx96xaccord

Copper - Posts: 118

Joined: August 31, 2004

Location: United States

Posted: June 30, 2005 at 12:48 PM / IP Logged

With the fiberglass project i am workin on i plan on using a high build primer. Will i be able to paint right over that, or do i need to go over it with a non sanding primer also?

would u like your chicken original or extra crispy?

Back to Top

Search for other posts by phatx96xaccord

crippled4life

Member - Posts: 8

Joined: June 22, 2005

Location: United States

Posted: June 30, 2005 at 1:13 PM / IP Logged

u can paint right over it...

Back to Top

audiomechanic

Silver - Posts: 388

Joined: November 09, 2002

Location: United States

Posted: July 01, 2005 at 7:00 AM / IP Logged

in my experience, it is best to use a sealer over the polyester primer. I have had issues in the past where the base coat(color) soaked into the poly primer and it took a lot more paint to cover and make it look even.

Back to Top

phatx96xaccord

Copper - Posts: 118

Joined: August 31, 2004

Location: United States

Posted: July 01, 2005 at 1:01 PM / IP Logged

is there a particular sealer that u recommend, and also , not important, but do they make any in aerosol. Jus curious because i thought that would be quick and easy, i plan on using a air compressor and spray gun for the paint though.

would u like your chicken original or extra crispy?

Back to Top

phatx96xaccord

Copper - Posts: 118

Joined: August 31, 2004

Location: United States

Posted: July 01, 2005 at 1:03 PM / IP Logged

is there a particular sealer that u recommend, and also , not important, but do they make any in aerosol. Jus curious because i thought that would be quick and easy, i plan on using a air compressor and spray gun for the paint though.

would u like your chicken original or extra crispy?

Back to Top

phatx96xaccord

Copper - Posts: 118

Joined: August 31, 2004

Location: United States

Posted: July 01, 2005 at 1:04 PM / IP Logged

sorry for all the posts. computer was acting goofy

would u like your chicken original or extra crispy?

Back to Top

audiomechanic

Silver - Posts: 388

Joined: November 09, 2002

Location: United States

Posted: July 01, 2005 at 5:59 PM / IP Logged

most of the time I use sherwin williams products and House of Kolor. I have used both of their sealers with great sucess...........you would have to go to your local paint supplier and ask to make sure. a lot of companies has a sealer in a rattle can for touch ups.

just go and ask.

TREVOR

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

priming and painting

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.