the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

95 camry radio removal?


Post ReplyPost New Topic
< Prev Topic Next Topic >
mobileinstallat 
Copper - Posts: 92
Copper spacespace
Joined: October 14, 2002
Location: United States
Posted: July 01, 2005 at 4:21 PM / IP Logged  
trying to remove 1995 radio from toyota camry.
any help on easy removal? removal instructions??
Blowntweeters 
Silver - Posts: 650
Silver spacespace
Joined: June 03, 2005
Location: Nevada, United States
Posted: July 01, 2005 at 4:37 PM / IP Logged  
if its anything like the 95 4 runner there are some 10mm bolts on the bottom of the dash at the ends close to the doors  once you get those out then you should be able to do the rest and when your putting in the new H/U you have to trim the top edge of the plastic deal that sits under the H/U you will see the little parts im talking about  if you dont trim those off or the new H/U wont sit right
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: July 01, 2005 at 4:51 PM / IP Logged  
  • Pry trim plate from bottom releasing two clips
  • Lift bottom of trim panel up and away from dash to release upper edges of trim panel from behind above panel.
  • Remove four screws securing car stereo to dash.
  • Pull car stereo and pocket forward, disconnect antenna and connectors.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
chungo 
Copper - Posts: 135
Copper spacespace
Joined: December 31, 2003
Location: United States
Posted: July 01, 2005 at 5:45 PM / IP Logged  

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer