2001 Chrysler Sebing remote Start

Hi i have an Implus RES Remote Start and it came with the DEI 555C Interface Module

my Question is how do u get the Factory Alarm to go into a "Learn Routine" Program mode.

the instructions tell me to

insert 1 of the program keys into the ignition and turn the key to RUN position for 8 seconds then turn to OFF and within 10 seconds remove the key and insert the Second programed key in and turn to the RUN position for at least 10 Seconds..depondeing on the model the Vehicle theft security System (Vtss) or sentry Key Immobilizer system lamp will start to flash..

This doesn't happend i tried this twice and nothing....

can u help is there another way to program the DEI 555c?

or another way to get into the factory alarms "learn routine" programming mode?

thanks alot!

Vince

I find the instructions with the DEI piece to be very accurate.

The light you're looking for on the Sebring is just a little round, red, dot a little over 1/8" in diameter; it is somewhere in the instrument cluster.

Hummm..........does it make a tone too??? and it s alittle red dot u say i will try again!

THanks for the help!