Dual mono driver- kenwood

hi im buying 2 kenwood kac-9152d amps. now they can be connected in dual mono drive to attack one sub. i wanted to know how the gain seetings and anyother settings would need to be matched or if the control is just off the single amp. wiring diagrams would be a plus. thnaks alot6* Rockford T2's

6* POWER AMPs

BLACK CORRADO

BAANNGGIINN

What you are doing is strapping amplifiers. If they are designed to be strapped, most of these amps will use a master and slave configuration. Meaning one amps controls for gain, crossover etc. will control the second amp. There must be a wired connection between the two amplifiers however for this to happen, it is usually a phone jack type of cable that is used for it. Do your amps have this connection?Top Secret, I can tell you but then my wife will kill me.

yes, the actual system is called dual mono drive. and i'm looking to power a sub which i wish not to state that can take around 5,000 rms but i need to stick to a budget and buying two amps capable of such wattage would mean around £2000 worth of amp. these amps are fairly cheap so i thought i'd give them a shot. any ideas on these amps. kenwood kac-9152d strapped.6* Rockford T2's

6* POWER AMPs

BLACK CORRADO

BAANNGGIINN

If the sub is a DVC type sub, then just attach each amp to a VC.Kenwood all the Way!

if your on a budget  and you need big power and not concerned with long warrentys check out www.ikesound.com 1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700

thanks alot, ill get in contact6* Rockford T2's

6* POWER AMPs

BLACK CORRADO

BAANNGGIINN

is this sub in ? the solo baric X 18" if it is those two amps are not enough power take a look at the orion amps at ikesound 1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700