the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Another System Idea?


Post ReplyPost New Topic
< Prev Topic Next Topic >
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: December 06, 2002 at 9:10 AM / IP Logged  

o yeah kool

and it pushes more than 500 right i know fosgate is underated but i want the most i can get out of that 1 sub.

does it draw alot of current?

what if i go to the next one higher i think its the 800.1 right?

bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: December 06, 2002 at 9:45 AM / IP Logged  
If you want the max out of the L7 its power rating is 750 watts rms you only plan on running 500 so you might want to look at a amp with more power
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: December 06, 2002 at 10:04 AM / IP Logged  

i looked in to the rockfor amps

i was thinking the power 1000.1 i think thtats way enough itssays 1000wats at 2ohms and that what im runnig and those amps are underrated

is that a good choice

bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: December 06, 2002 at 10:47 AM / IP Logged  
That’s a little more power than you need but would defiantly push that sub.  That is a   strong amp but as long as you properly adjust the gains it will not harm your sub. but it sounds good
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: December 06, 2002 at 2:55 PM / IP Logged  

ok koool

any tips on adjusting the right way or just bring the gains upslowly?

thanks

bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: December 06, 2002 at 3:53 PM / IP Logged  
Turn the gain down all the way then turn up the volume on the head to 60%. Then slowly turn up the gain till you start to hear distortion then back off the gain a little and it will be set.
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: December 07, 2002 at 1:08 AM / IP Logged  

thats what i usually do

but should i leave the bass on the radio on "0" or put it up alittle the alpine cva1003 goes upto and minus 7.

also it has a subwoofer out  conmtrol level which goes to 15/ put that on like half or 10 or so?

thanks

bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: December 07, 2002 at 10:39 AM / IP Logged  
I would run them at about half way and if you start to hear any kind off distortion turn them down a little
Page of 5

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer