where is the best spot to put a port tube

Home / the12volt's Install Bay / Car Audio / where is the best spot to put a port tube (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

slicksteveo

Copper - Posts: 47

Joined: May 11, 2005

Location: United States

Posted: July 23, 2005 at 10:24 PM / IP Logged

alright i have two 12 inch 1500 watt audiobahn subs, they say they need a 2.4 cubic foot box per sub and it needs to have a port tube @ 4 x 7.25... where would be the best place for the port? on the top of the box or on the front with the subs? i want the box to hit as hard as it could...

pioneer head unit, dual 6.5 door speakers, rear pioneer 6x9s, 2 aw1208t audiobahn subs 1500 watts RMS each, one virtual reality 400 watt amp, and one 3000 watt Boss mono channel class D amp

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: July 23, 2005 at 10:52 PM / IP Logged

On front with the subs, in general.

Support the12volt.com

Back to Top

slicksteveo

Copper - Posts: 47

Joined: May 11, 2005

Location: United States

Posted: July 23, 2005 at 10:58 PM / IP Logged

so put each hole on the same side where the subs are mounted? like right next to them right or close enough?

pioneer head unit, dual 6.5 door speakers, rear pioneer 6x9s, 2 aw1208t audiobahn subs 1500 watts RMS each, one virtual reality 400 watt amp, and one 3000 watt Boss mono channel class D amp

Back to Top

stevdart

Platinum - Posts: 5,816

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: July 24, 2005 at 7:14 AM / IP Logged

Separate the port tube from both the driver and the sides of the box by a least the diameter of the port tube (4").

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Back to Top

slicksteveo

Copper - Posts: 47

Joined: May 11, 2005

Location: United States

Posted: July 24, 2005 at 11:15 AM / IP Logged

so the tube should be 4 inches from the side of the box and 4 inches from teh sub?

pioneer head unit, dual 6.5 door speakers, rear pioneer 6x9s, 2 aw1208t audiobahn subs 1500 watts RMS each, one virtual reality 400 watt amp, and one 3000 watt Boss mono channel class D amp

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

where is the best spot to put a port tube

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.