GM In Dash installations

Home / the12volt's Install Bay / Car Audio / GM In Dash installations (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

davis87

Copper - Posts: 50

Joined: June 23, 2005

Location: United States

Posted: July 24, 2005 at 8:41 PM / IP Logged

I have a 95 chevy lumina. My dad had to put a kit in the dash to install a single din radio. My brother took the radio out. Now Im going off to school and will be putting another radio in using the same kit that was originally installed. I was wondering if the radio is supposed to be screwed to the kit, because my dad said that the trim plate would hold the radio in place. I just need to know so the radio doesnt fall out. I need to know if it needs screws or not.

Back to Top

the96ex

Member - Posts: 12

Joined: April 14, 2005

Location: United States

Posted: July 24, 2005 at 8:58 PM / IP Logged

With that car it is DIN mounted, so you use the radio's cage to secure the radio to the kit. Just bend the tabs all around the cage to the kit (locking it in place) and slide the radio in.

96 Accord EX Coupe 5-Speed

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

GM In Dash installations

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.