spacer spacer spacer spacer

2003 Altima Remote Start Connect to Factory Remote Tip

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 15
Member spacespace
Joined: November 28, 2002
Location: United States
Posted: November 28, 2002 at 8:33 PM / IP Logged  
If your keyless sys. has trunk pop, then it's possible to do this AS LONG AS THE KEYLESS ENTRY MODULE DOES NOT ALSO WORK WITH THE TRUNK POP SWITCH IN THE CAR!!!. you have to find the keyless module and cut the output to the trunk solenoid. The output of the module will probably be +12 volts so you would have to use a relay to switch it to a ground output.  Also check to see if the trunk pop button on your remote works while your car is running! This is so you can have control of the car start and shut it down if you need to. I have done this on a 1998 Nissan Maxima. If you don't want to do all that, then get a keyless entry/ carstart piece so this way you would have all your options and just toss your factory remotes in a drawer
Innovative Sounds
Phila., Pa.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Wednesday, June 12, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer