the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

D600 and 2 JLw3v2-d4?


Post ReplyPost New Topic
< Prev Topic Next Topic >
TWR_e34 
Member - Posts: 1
Member spacespace
Joined: August 06, 2005
Location: United States
Posted: August 06, 2005 at 8:57 AM / IP Logged  
This is the first system I have ever built. It is in a 91 BMW 525i (black on black). I bought 2 JL w3v2 four ohm subs, prior to that I was only planning to have one sub so got a directed 600D (mono 200rms @ 4 ohms not 1 ohm stable). I am debating if i should get a different one or stick with it, my over all goal is to have a very clean sounding system not drowning with bass but complete. Does 200watts seem like a good RMS for those 2 or should I get something bigger? I have a sealed box that is roughly 1.6 cu ft.
Thanks for any help
TWR

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 12, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer