Wiring 4 Infinity Subs, 2 DVC & 1 SVC

Home / the12volt's Install Bay / Car Audio / Wiring 4 Infinity Subs, 2 DVC & 1 SVC (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Darlabbq

Member - Posts: 9

Joined: May 27, 2005

Location: United States

Posted: August 10, 2005 at 11:51 PM / IP Logged

Hello, I am clueless on how to wire these 3 subs.

1 is a single voice coil Infinity Kappa Perfect 10.1

and the other 2 are the 10.1 dual voice coils

Here are the specs for the amp I have.

Can anyone give me ideas on the best wiring for me?

Audiobahn A2200HCQ 1600W High-Current Amp

OUTPUT POWER:

4 Ohm Stereo: 200 X 2 Watts

2 Ohm Stereo: 400 X 2 Watts

1 Ohm Stereo: 600 X 2 Watts

4 Ohm Mono: 400 X 1 Watts

2 Ohm Mono: 800 X 1 Watts

1 Ohm Mono: 1600 X 1 Watts

FEATURES:

High Current Circuitry

PVM MOSFET Power Supply

Double Sided Glass Epoxy Circuit Board

S/N Ratio: >100dB

Frequency Response: 10Hz-40,000Hz (+/- 1dB)

Variable 24dB Hi-pass Crossover: 50Hz-750Hz

Variable 24dB Low-pass Crossover: 30Hz-120Hz

Variable Bass Boost: 0-18dB

Variable Bass Boost Frequency: 40Hz-100Hz

Variable Subsonic Filter: 20Hz-45Hz

RCA Throughput Connections

4-way Protection Circuitry: Thermal, Short Circuit, Overload, and DC Offset

Dual Cooling Fans

VU Meters Indicating Output Response

Cobalt Blue Illumination

High Gloss Chrome Plated Finish

Dimensions: 3 11/16"H x 12"W x 23 1/16"D

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: August 11, 2005 at 12:32 AM / IP Logged

first. You didnt give any impedanece's for any of the subs.

Second, its not wise to mix subs, espically if they are in a common chamber.

Third. Audiobahn enough said

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Darlabbq

Member - Posts: 9

Joined: May 27, 2005

Location: United States

Posted: August 11, 2005 at 7:12 PM / IP Logged

Well it turns out that I was supposed to get 3 dual voice coil subs. But someone sent the wrong one. Here is the link where I bought the subs

http:///.com/dll?ViewItem&item=5787896119&rd=1&sspagename=STRK%3AMEAFB%3AIT&rd=1

Here is all the info I know on the subs.

aluminum cone
high-roll butyl-rubber surround
massive cast-aluminum basket
dual 4-ohm voice coils
suitable for free-air use (handles up to 175 watts in free-air applications)
recommended power range 75-350 watts RMS (175 watts per coil)
peak power handling 1,400 watts
frequency response 18-200 Hz
sensitivity 94 dB
top mount depth 5-3/4"
sealed box volume: 0.6 cu. ft.
ported box volume: 1.0 cu. ft.

The box came from subthump.com and is this one- http://www.subthump.com/acamarowell.htm

It is the triple 10" one. So I have the recommended cubic feet. I don't know what impedence is? This is my first MAJOR system. I used to have 1 kicker sub and a small sony amp. Now I have upgraded everything to match power wise hopefully. So now I also need an alternator! Anybody got any suggestions on what size I need with what I have going? It is for a 2001 SS Camaro.

Darlabbq

Member - Posts: 9

Joined: May 27, 2005

Location: United States

Posted: August 11, 2005 at 7:18 PM / IP Logged

That previous post doesn't look to good so I will try again.

Well it turns out that I was supposed to get 3 dual voice coil subs. But someone sent the wrong one. Here is the link where I bought the subs

http:///.com/dll?ViewItem&item=5787896119&rd=1&sspagename=STRK%3AMEAFB%3AIT&rd=1

The box came from subthump.com and is this one- http://www.subthump.com/acamarowell.htm

http://www.cardomain.com/item/ABNA2200HCT

This is the link for the amp. That is all I know to give as I do not know what impedance is.

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: August 11, 2005 at 11:17 PM / IP Logged

Damn, Darla, you bought your subs on Ebay and didn't get what you bought? Send them back, demand a refund, complain to the staff.

Don't go any further with this project until you get the number of subs you want that are all identical to one another. And you MUST know what impedance is before you can match up subs (or any speakers) with an amplifier.

You need to achieve a total of 4 ohms or greater to use the subs with the amp in a bridged fashion. Look over to the left at woofer wiring. Put in 3 as the number of woofers and see what you can do with the different coil configurations available in subs.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wiring 4 Infinity Subs, 2 DVC & 1 SVC

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.