the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

95 BMW 325 Head Unit/Amp Wiring - FYI


Post ReplyPost New Topic
< Prev Topic Next Topic >
redpeppers 
Silver - Posts: 483
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 24, 2005
Location: United States
Posted: August 25, 2005 at 1:11 AM / IP Logged  

This is for those of you that get that customer that wants an aftermarket deck or amp in his 10 speaker BMW 325.  Below is a wire diagram to bypass the factory amp for aftermarket headunit and amps.

Besure to sell the standand BMW wire harness and ant. adapter, hook all of the wires up correctly.  You can look at harness and use factory signal wires into factory amp (which is located in driver rear panal) or run your own wires.

Output wires (at amp) go like this.  If only adding an aftermarket head unit be sure to wire at approx. 8 ohm per channel to not cause damage to deck.

-Left side:

-Door:
Tweeter = Yellow/red + , Yellow/brown -
Mid = Yellow/black + , Yellow/brown -
-Kick panel:
Full range = Blue/white + , Blue/brown -
-Rear:
Tweeter = Yellow + , Brown -
Mid = Yellow/black + , Yellow/grey -

-Right side:

-Door:
Tweeter = Blue/black + , Blue/Brown -
Mid = Blue/red + , Blue/brown -
-Kick panel:
Full range = Blue/red + , Blue/brown -
-Rear:
Tweeter = Blue = , Brown -
Mid = Blue/purple + , Blue/grey -

Where theres is a wire there's a way.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, August 9, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer