My day old posting it's gone...it's regarding rela

Vaporized,anyway i need a bit clarification on relay matter.I have 8 items conected to one relay for remote turn on,i'm about to conect one more # 9,can the relay take it ?

The list of things Mr.Bosch "the relay" has to deal with : 4 amps,one eq,one active crossover,one cap charge level indicator,digital cap display and the one i plan to add it's an voltage (digital) gauge that will go in my glove box.The charge level shows the charge in colored bars and the other cap display it's in the trunk in case anyone was wondering why so many ...gauges.

Thank you.

ps : the relay it's fused.

to be on the safe side i would have 2 relays and split all that stuff up maybe even three. it really can hurt anything if you add more relays just make it safer and less likely of blowing fuses

in my opinion

Forgot to mention that your wire to the relay (power and Ground) should have a rating of at least 15 amps

So in another words it's ok to add another piece of equipement ?,and yes it is a Bosch relay.

Thanks guys.

Dan, you can always search for your posts by username if you happen to misplace it again. https://www.the12volt.com/installbay/search.asp?search=Dan%20M%20C&searchIn=Author&forum=1&searchSort=dateDESC

BTW, here it is: https://www.the12volt.com/installbay/display_topic_threads.asp?ForumID=1&TopicID=6204

With regards to the Bosch relay, it's rated at 30 amps and will handle the load you described. 

glad to have helped out