JL 15W3v2 Box

Home / the12volt's Install Bay / Car Audio / JL 15W3v2 Box (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sampsotr

Member - Posts: 11

Joined: May 20, 2005

Location: United States

Posted: September 14, 2005 at 12:48 PM / IP Logged

Ok I'm building a sealed box for 2 JL 15W3v2 D4's the JL audio web site says 2.125 cubes per subs. There is no range. Can anyone tell me if this is the min or the recomended. If it is the minimal can anyone tell me the best size. I can do about 3.3 cubes each. Please hurry because I need to start right away.

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: September 14, 2005 at 1:24 PM / IP Logged

They recommend anywhere from 1.5 cu ft to 3.5 cu ft for a sealed enclosure with the sweet spot falling between 2.25 and 2.75 cu ft.

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: September 14, 2005 at 1:28 PM / IP Logged

Ooops my bad, this is for a 15" W3 D4 ( not the V2 ) I'll find it and get back to you.

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: September 14, 2005 at 1:35 PM / IP Logged

2.0 to 2.75 with the ideal capacity of 2.25 cu ft.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

JL 15W3v2 Box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.