the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Avic Ni 12 volt delay


Post ReplyPost New Topic
< Prev Topic Next Topic >
Go4DKil 
Member - Posts: 16
Member spacespace
Joined: February 11, 2005
Location: United States
Posted: September 14, 2005 at 3:24 PM / IP Logged  
I have an Avic N1 installed in my 1999 F350SD and would like to power the keyed 12 volt + with the same delay relay that keeps power to the electic windows untill the doors are open. I know the 2004 model is wired with this feature. What color wire and where is the best place to tap in to this circuit.
genehewett 
Copper - Posts: 151
Copper spacespace
Joined: December 12, 2003
Location: Georgia, United States
Posted: September 15, 2005 at 12:54 AM / IP Logged  
    This is called RAP (retained accessory power) if the vehicle dont have it you will have to use this wiring to get the same affect.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer