2001 kia sephia

Home / the12volt's Install Bay / Car Security and Convenience / 2001 kia sephia (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

accord78

Copper - Posts: 97

Joined: February 23, 2005

Location: United States

Posted: September 18, 2005 at 8:26 PM / IP Logged

does any 1 knows how i would go about hooking up an actuator on the driver side door to any after market alarm system that has keyless entry ofcourse.beacuse this car has a central locking system oh by the way i'm using a 2 wire actuator. would i need any relays or can i hook it up directly to the alarm brain

Back to Top

ccroadshop99031

Copper - Posts: 102

Joined: January 26, 2004

Location: United States

Posted: September 18, 2005 at 10:31 PM / IP Logged

you will need 2 relays wired up identically 85 to + 12v fused 86 to lock output on one relay and unlock on the other 30 to the acutator (one wire for each relay) 87a to ground and 87 to 12v + fused

Back to Top

Search for other posts by ccroadshop99031

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 kia sephia

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.