the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Commando FM-5005


Post ReplyPost New Topic
< Prev Topic Next Topic >
auto5 
Member - Posts: 6
Member spacespace
Joined: October 31, 2003
Location: United States
Posted: September 20, 2005 at 4:43 PM / IP Logged  
Hi, I am having problems with my alarm system, Commando 5005. Remote start works fine, door locks work fine, heres problem.  When I arm alarm and set it off I have flashing parking lights but no siren, also when I try to go into program mode, the LED just stays on, and it will not chirp.  Found I cannot program second remote which is how I found out the alarm was not working properly.  Does this sound like it is time for a new siren, and will a bad siren cos the alarm not to go into program mode. When I turn the ignition on, the LED blinks three times one time and four times for four times, I do not know what that would mean, any help would be appreciated, thank you very much and have a great day.
blazeronspokes 
Copper - Posts: 102
Copper spacespace
Joined: February 09, 2005
Location: United States
Posted: September 20, 2005 at 8:07 PM / IP Logged  
check the ground on the siren.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 21, 2005 at 7:21 AM / IP Logged  
Check your siren output for (+) when the lights flash. If your getting a (+) signal from the siren output off the alarm harness, check to see if you have continuity between the siren and the CPU incase the wire was cut or damaged. Next check to be sure that the ground is good off the siren and the alarm system.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, November 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer