How to adj alarm sensitivity on Venture

Home / the12volt's Install Bay / Car Security and Convenience / How to adj alarm sensitivity on Venture (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ultradoug

Member - Posts: 2

Joined: September 20, 2005

Location: United States

Posted: September 20, 2005 at 10:06 PM / IP Logged

Got a 00 chevy venture with fact alarm that's too sensitive. Is there an adjustment on the alarm brain? If so, can you direct me where to get to the brain and adjustment- is it under the pass kick panel? If not, how do I disable alarm? I think there may be a fuse I can pull, so long as I don't lose the horn.

Thanks.

There's a fine line between hobby and mental illness.

blackshuck

Member - Posts: 29

Joined: March 31, 2004

Location: Canada

Posted: September 20, 2005 at 11:46 PM / IP Logged

if you wanna disable it, it should say in your user manual (I'd read mine, but its at the body shop) But there is options as to when you want your alarm to turn on. There's a "with transmitter only" option, a "transmitter, or from the outside with the key" option, and "transmitter, from the outside with the key, or pressing one (might just be drivers side, not quite sure) of the power lock switches while a front door is open" or something stupid like that. and I believe there's also an off option. Good luck.

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: September 21, 2005 at 12:16 AM / IP Logged

The factory shock sensor is under the driver's dash. Tear the tape off it and use the adjustment dial.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

ultradoug

Member - Posts: 2

Joined: September 20, 2005

Location: United States

Posted: September 23, 2005 at 7:51 PM / IP Logged

I could use some more detail on the shock sensor location if anyone has it for the 00 venture.

Also, I don't have a manual for the vehicle. can someone who does inform me of the procedure for changing the alarm settings?

Thanks!

There's a fine line between hobby and mental illness.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

How to adj alarm sensitivity on Venture

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.