1996 Windstar Problems, No Sound

Home / the12volt's Install Bay / Car Audio / 1996 Windstar Problems, No Sound (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

shad5150

Member - Posts: 5

Joined: September 22, 2005

Location: Canada

Posted: September 27, 2005 at 7:36 PM / IP Logged

gus1 wrote:

Okay, so on the factory plug... the last two positions are empty, correct? And both the 8 wire grey and the 8 wire black plugs are the same style (flat, rectangular, the only difference is the color)?

If so... there probably isn't an amp in the van. As far as your mystery 2 wire plug.... there are rear audio contols?

Can you "pop" any speakers directly from the 8 wire speaker plug using an AA battery?

If there is a wire in the last position on the factory 8 pin power plug (with the constant 12V being considered as the "first" position), that is your amp turn on wire, with power antenna being right next to it. Even if there isn't a power antenna.... they sometimes use the "power antenna" wire to flip the amp on as well.

As to where the amp is actually hiding in that thing if there is one? Dunno.... never had to look for it. Possible locations are: In behind glovebox (vaguley remember seein an amp there once), pass. kick, or lower dash below radio.

HTH

Gus

I did get a pop sound. I also found the old factory stereo and plugged it in without the 2 pin black harness and the stereo works, sound and everything.

So is this the deck I am putting in the problem? It is a Kenwood KDS - 2011S.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1996 Windstar Problems, No Sound

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.