best amp for 2-12 RF Punch stage 1 subs?

I am wondering if anyone could give me some ideas on what amp i should buy to power two 12" Rockford Fosgagte Punch stage 1 subs. i want to get the most out of the subs since they are in a relatively small sealed box(.68 cu ft). looking for something relatively inexpensive that still provides all the power they can handle. thanks P SUB Specs: # 12" 4-ohm subwoofer # molded polypropylene woofer cone with foam surround # frequency response: 20-200 Hz # power range: 50-150 watts RMS # peak power handling: 300 watts # sensitivity: 86 dB # top-mount depth: 5-3/8" # sealed box volume: 1.25 cubic feet # ported box volume: 1.75 cubic feet _P Griff

that sealded box volume is .68 cu ft per sub side here is a pic of the box the subs are in _P Griff

you should be able to go with the rockford 3001 mono amp. i sell that setup all the time and it sounds pretty good for the money.

A JL 250/1 will give them 125watts a piece, plenty of jucie to get them moving

A Memphis 16-MCA300 will put 150 watts a piece to themThere about 5,000 other Amps that will work as well, whats your budget? Later

--Skold

2004 Honda Civic Ex 4Dr

Kenwood DDX-7015/W Nav

4 Fosgate T152C

Hifonics Brutus BX1500D

RE XXX 12 in a 4 Cube Snail Shell

I am looking to try to get a steal on someting around $150-$180_P Griff

if you want a steal .check out www.ikesound.com there is a lot of mono amps. that will fit the bill for less than that.1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700

if you really want to get them going you are prolly gonn ahve to spend more then that.1993 Ford Ranger.

Head Unit.Alpine CDA-9831

Front Speakers.Infinity 6010 Reference Series

Amp.Alpine MRD-M1005

Subs.3 Kicker CVR10

Rear Speakers.SPL CS-573

20" Boss 312's, lowered 3/4