Crimestopper 2011RS

Home / the12volt's Install Bay / Car Security and Convenience / Crimestopper 2011RS (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

djambush

Member - Posts: 39

Joined: October 07, 2002

Location: United States

Posted: December 09, 2002 at 10:53 AM / IP Logged

You know, when you think you know what you are doing, something always gets in the way to bring you back to reality. I am a dissapointed owner of a CS2011RS for my 94 Honda Accord EX. I have installed many alarms before. Actually the last install was a VIPER 300+ on a 92 honda accord. Installation went fine.

Now, I am on my car. Took me 5 hours to figure this out and I have no clue still at this point.

I had all the wires in neatly taped, all the locations tapped and all. No RESPONSE from the alarm. Nothing but some faint chirps from the siren.

I think the mod my be dead but im not sure. The thing that bothered me the most was the (2) 12v sources it required and it said to go to the BATTERY. Why?

Im kind of regretting this. Maybe I should have bought the Aladdin for my car.

If anyone has any ideas, please let me know.

Thanks

Upset AMbush

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 09, 2002 at 7:47 PM / IP Logged

Whenever I get a faint chirp from a system, it means that either the power or ground is not good enough at the unit or at the siren. Check the fuses to make sure they are both good and also check to make sure that the harness is completely plugged in on all parts of the Crimestopper.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Mr. Installer

Member - Posts: 3

Joined: December 09, 2002

Location: Canada

Posted: December 09, 2002 at 8:00 PM / IP Logged

I put lots of those in and that has happened to me before and it turned out to be the ground. Make sure you have a good ground .8ohms or less.

Mr. Installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Crimestopper 2011RS

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.