Varad LED's on a Viper 791xv

Home / the12volt's Install Bay / Car Security and Convenience / Varad LED's on a Viper 791xv (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

maxspeeds

Member - Posts: 21

Joined: January 11, 2004

Location: United States

Posted: November 05, 2005 at 8:16 PM / IP Logged

bobk wrote:

you cannot use the led output on the alarm, if you want to use your led's then use a relay triggered by the ground when armed wire.

bobk, if I use the ground when armed output wire, won't the led's just stay on constantly? I would like them to operate normally as the included blue one does.

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: November 06, 2005 at 10:28 PM / IP Logged

I have mine hooked up in parallel, with a 1K resistor at each one. You can also wire them in series (the OEM DEI LED's anyways) with no current limiting resistor.

The Viper uses a 2V output, BTW, red is Positive.

Gus

Wherever I go, that is where I end up......

maxspeeds

Member - Posts: 21

Joined: January 11, 2004

Location: United States

Posted: November 08, 2005 at 8:07 PM / IP Logged

Gus, thanks for the replies. btw, are you using varad led's?

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: November 08, 2005 at 8:42 PM / IP Logged

Not that I know of. I believe they are the blue viper ones on the door ones, and I can;t remember what the center dash one is. It might be a Varad. It isn't a DEI one, but it is clear, and lights up nice and bright blue.

Gus

Wherever I go, that is where I end up......

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Varad LED's on a Viper 791xv

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.