the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

530t window module issue Chevy Silverado


Post ReplyPost New Topic
< Prev Topic Next Topic >
chrisandersen 
Member - Posts: 42
Member spacespace
Joined: October 11, 2005
Location: United States
Posted: October 12, 2005 at 3:56 PM / IP Logged  

I have a Viper 791XV in my 2003 Silverado truck.  I was preparing to install the 530t window module and am having some issues. 

After wiring the drivers door according to the instructions regarding vehicles with a factory control module, directly at the motor, the window works fine with the alarm remote disarm and roll down function. The window switch in the door is completely eratic now though.  It only goes all the way up or down, sort of like the one touch function with no stopping or modulating in between.

Is there something I should know about this application?

Thanks,

Chris Andersen

blazeronspokes 
Copper - Posts: 102
Copper spacespace
Joined: February 09, 2005
Location: United States
Posted: October 12, 2005 at 4:18 PM / IP Logged  
with the 530t window module it comes withone-touch control. you can stop the window by pressing the direction the window is going again.(hit down once, when the window is at the height you want it, hit down again.)
chrisandersen 
Member - Posts: 42
Member spacespace
Joined: October 11, 2005
Location: United States
Posted: October 12, 2005 at 4:24 PM / IP Logged  

Is that setup my only option with this application?

chrisandersen 
Member - Posts: 42
Member spacespace
Joined: October 11, 2005
Location: United States
Posted: October 12, 2005 at 4:30 PM / IP Logged  

Actually....the windows do not stop after trying what you suggested.  They merely pause and continue on in the direction they were headed.  Basically they cannot be controlled, and they will occasionally go in the opposite direction expected.

Could I be experiencing something else?

Hornshockey 
Silver - Posts: 520
Silver spacespace
Joined: January 31, 2005
Location: Texas, United States
Posted: October 13, 2005 at 2:46 AM / IP Logged  
if you press and hold the switch for more than 1 sec you will have normal operation of the switches (i.e. the window stops when you let go of the switch). 
Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, February 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer