Delayed output form alarm?

is there anyway to delay the siren output from the alram when triggered. i want to add the piezo siren that i have but never did it because incase im in the truck and the alrm goes off i dont wanna go deaf lol.. so can you delay it by maybe 30 sec or so then have the other sirens go off this way i have time to disarm it. and also i can tie in the strobes to this so they will only go off 30sec after the alrm is triggered thanks

    Yes you can delay the activation of almost anything you want with the use of a 528T. But you need to think more about the delay time. Most alarms only sound for about 30sec. then reseting (unless changed in programing). Good Luck!

yeah thats true im thinking now if i delay it for 5-10 secd is it even worth it??? maybe ill just put them in and see what happens i dont hink i ever been in the ruck and the alarm went off. im just worried maybe about the arm and disarm chirps???? but i thik i can hook 2 of these pezo sirens up to the alarm output with outany relays right? thanks

   It depends on the system. Check to see if it has a "alarming output". This would be ideal because it dont become active with arm and disarm only trigger and panic. As for adding two pezo sirens it will most likely be just fine but if your not sure you could just add a relay.

I used TR7 to delay my strobe lights hooked to the alarm. http://www.pac-audio.com/products/alarm.htm