VSS Simulator for autolock

Home / the12volt's Install Bay / Car Security and Convenience / VSS Simulator for autolock (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mmh1

Copper - Posts: 117

Joined: May 10, 2005

Location: United Kingdom

Posted: October 17, 2005 at 5:11 AM / IP Logged

Hi,

I need a way to simmulate a VSS negative pulse signal to get my vehicle to autolock after the ignition is on.

Please see my previous thread:

https://www.the12volt.com/installbay/forum_posts.asp?tid=63657&KW=mmh1

Any help would be greatly appreciated.

Thanks, Mo

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 17, 2005 at 8:11 AM / IP Logged

If you are just wanting to Lock after vehicle is Started.....

There are many Keyless Entry units on the market that have Auto-Lock / Unlock built in for less than $ 30.00 U.S. You don't need to use the Remotes.

VSS can be produced on many older vehicles by using an old Signal Generator from a Cruise Control or Magnets & Sensor from Cruise Control.

But this would keep Locking your doors everytrime you took off......

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

VSS Simulator for autolock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.