anyone have vocalarm manual

I'm thinking of adding a vocalarm,and wanted to see how i would set it up so that it will only go off when the alarm is set off,not as a warnaway.Any help is appreciated.."ole blake"

Am i correct in saying that i will only connect the red,black,and blue wires from the 506t,since my arrow 3 already has a second sensor plug harness,that has black,red,blue,and orange?So what do i do with the orange? JUst leave it or snip it?"ole blake"

After reading my manual and the 506t manual,if i'm right,the only wires i need to connect are the red,black,and blue wire from the sensor.The blue wire from the glass sensor,will tie into the clifford orange wire.Am i correct??"ole blake"

By "vocalarm" are you speaking of a DEI 516u ?? If so, then yes, you can have it setup to only trigger on the full alarm and not the warn away.Just whatever triggeres your full alarm, wire that trigger wire to the warn away input on the 516u. You can also have it setup to not have the armed and disarmed messages as well. Just read through the install manual for the 516u here.