'91 mustang GT

Sounds like you got it under control..........Usually the Door lock wires would be cut in half and now you would need to reconnect them if you have both halves??  MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

hmmm its the other half i cant find.  its really weird.  ok lets pretend the other half is somehow already hooked up, how do i go about hookingup the 4 wires to the 5 wires.. some sort of relay?

You only need Relays if your Compustar does not have ability for 5 wire Reversal

2 SPDT RELAYS:

Cut LOCK  & UNLOCK Wire in Half.

One Half goes to SWITCHOne Half goes to ACTUATOR

Relay 1

LOCK:

PIN 87 =  12 Volts ( + ) ConstantPIN 87a =  wire from Door Lock SwitchPIN 30 =  wire to Lock side of ActuatorPIN 85 = Negative Lock Output from AlarmPIN 86 = Constant 12 volt ( + )

Relay 2

UNLOCK:

PIN 87 =  12 Volts ( + ) ConstantPIN 87a =  wire from Door UnLock SwitchPIN 30 =  wire to UnLock side of ActuatorPIN 85 = Negative UnLock Output from AlarmPIN 86 = Constant 12 volt ( + )

Power Lock	PINK / YELLOW	DRIVER KICK
Power Unlock	PINK/LIGHT GREEN	PANEL

Reversal Rest At Ground Door Locks

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.